The Pedal File – Fun with a Minimal Pedalboard

Hello and welcome to the Fellowship of the Pedal, commonly referred to as the Pedal File.  Today I want to flip things around and make you question your pedal beliefs.  Let’s put your mind in the sweet new shoes of another perspective:

Minimalism

What I mean by minimalism in this respect is but one definition of the word – a design or style in which the simplest and fewest elements are used to create the maximum effect.  In other words and in this context, do more with less pedals.

I know what you’re thinking.  Use less pedals?  Everything I read and all you talk about is pedals, blah blah, pedals to infinity!  I know it sort of sounds like blasphemy, but sometimes cliches are right, and less is more.

Using fewer pedals means swapping out or switching the order of your effects without feeling like you’re using a Moog System 55.  (Sure pedals are awesome, but you know what are not awesome?)  Cables.  Would you care to put your dirt pedal in other places on the board to see how it sounds?  It’s a lot easier with less pedals – less weight to carry, space to take up, less cables, and less time thinking about turning pedals on and off.

The Pedal File - My Current Board

It’s easy to load up.

It can be hard, but take some deep breaths, and think about limiting yourself to just three pedals.  If you want to get hardcore downsize to one pedal.  Although initially dreadful, this thought can be liberating and inspire you to explore sound in an all new way.  Have you ever dared to not use any dirt pedals?  What about substituting another effect for distortion, like chorus?  How about using a pedal for a tone it wasn’t technically intended to produce?

With a little patience and willingness to explore, I’ll bet you’d be surprised by how much you can do with one pedal (and by what one pedal can do to you).  For instance, since delay, reverb, and chorus are all time based effects, you can achieve all three if you have the right delay pedal.  Set the delay time short (preferably less than a slapback, but experiment with longer delay times too!) and keep the repeats low – this will create a chorus or doubling effect (if you have a mix knob, see how things sound when increasing or decreasing the effect).  Begin turning the repeats up and you should make some pseudo percussive reverb sounds. Experimenting with different combinations of short delay times and the other knobs of a delay can yield sounds you can’t quite get with a reverb or chorus pedal (EQD’s Aftermath and Sea Machine are exceptions).

Remember kids, there is nothing wrong with using a pedal in a way for which it was not intended.  Just also remember, your friends and family may not want to hear about all of your experiences using pedals for ways they were not intended.

All this being said though, it doesn’t mean you can’t still be tasteful and use a knob factory’s worth of pedals.

Check out another fine article on the topic by Caroline Guitar Company’s Philippe Herndon and another by Sam Hill of Tone Report.

Now go out there and get em!

That’s all for now.  Thanks for reading.

Love,

Nick
The Pedal File

The Pedal File – The Time for Pedals is Now

Is there a more beautiful word than ‘pedal’?  I don’t think so.  Say it.  Say it again.  It feels good doesn’t it?  Mmm, pedal.

I love pedals.  I love experimenting with their sounds, tweaking their knobs, caressing their enclosures, rubbing my face against them, etc.  I’m always on the lookout for pedals that are well built, entertaining, unique, strange, experimental, and/or inspiring.  That’s why I’m here today to tell you about two cool pedals and how cool you are for reading this.  No need to thank me, just doing my job.

Keeley Electronics Vibe-O-Verb

The Pedal File - Keeley Vibe-O-VerbLately Keeley has been pumpin’ it out like Bill Cosby in a coma ward.  Seriously they’ve released like 25 pedals (give or take) in the last year.  Keeley must have employed Underpants Gnomes or something to do all this work for them in such a short time.  Pretty clever because they work for underpants, not money.

Anyway, I just caught a glimpse of the brand new Vibe-O-Verb and I was pretty impressed with Keeley’s most recent reverb rendition.  It’s a modulated reverb (usually reverb with chorus on the reverb tail), the likes of which have been around for a while, but the Vibe-O-Verb takes this idea up a notch like it was bammed by that fat greaseball Emeril himself.  With the Vibe-O-Verb you can achieve sounds that would only be possible with a reverb equipped with an effects loop, plus the other pedals for adding modulation to the wet signal; that could be a whole small pedalboard’s worth of space.  The reverb is dense and moody, full of movement, sway, and atmosphere, especially when utilizing the modulation.  You don’t want your reverb to be modulated all the time?  No worries, just turn the depth knob down and all you’ve got is the nice simple reverb to play with.  You Philistine.

fibonacci

Yup, that’s a galaxy and a cabbage.

Did I mention the delay space algorithms are based on the Fibonacci sequence?  If nature follows this pattern, why wouldn’t it be a good idea to model reverb decay time after it?

Tweakables:

Depth – this affects the amount of modulation on the reverb.  Set it low for a little or high for a lot, or turn it all the way down to eliminate the modulation.  I recommend leaving this up.
Rate – Also affects the modulation section.  Set it low for a nice wash, or high for faster rotary or choppy tremolo type stuff.
Decay – Adjusts the length of the reverb.  I’m not sure of the specifics, but based on the video it can be subtle or pretty cavernous.
Blend – blend in your clean signal.  You get to choose how much effect you want.  How liberating.

Modes:

harmonic reverb – imparts some choppy harmonic tremolo (basically like a vintage Brownface amp trem or Keeley’s DynaTrem) on the reverb tail.  Some settings end up sounding like delay as the reverb reverberates and the tremolo chops.
vibrato reverb – can do anything from subtle to extreme chorus/vibrato sounds on the reverb tail.  I don’t get into vibrato too much, but I really like the way it sounds on this pedal mixed with the reverb.  Of course the chorus sounds brilliant and seems perfect for getting all spacey and out there man.
phaser reverb – the most subtle of all.  Adds a notch filter to the tails.  From what I can tell this makes the brightness/darkness of the reverb shift from one extreme to the other.  Honestly it’s hard to detect in the video, but hopefully it’s more apparent when playing in person.

Check out the video from Pro Guitar Shop for a nice taste:

For more info:  www.keeleyelectronics.com

Mr. Black Shepard’s End

The Pedal File - Mr. Black Shepard's EndMr. Black is a small, but reputable company based out of Portland, Oregon.  They specialize in two categories of effects: dirt and modulation.  When I say specialize, I mean Jack Deville (the dude behind the mysterious company name) eats lesser dirt and modulation pedals for breakfast, which fuels his ability to produce effects that are perfect for getting all heavy and psychedelic like your momma on an acid trip.  Snap!

Mr. Black is kind of a big deal when it comes to modulation.  A lot of guitar players (and players of other things) swear by their Eterna reverb for it’s lush tone and I even once spotted a Black LTD Overdriver on the board of Jamie Stillman (owner of EQD).  My point again is that this guy knows pedals and has designed a real paragon in the Shepard’s End Infinite Flanger.

Now y’all should know by now that I think flangers are the shit, and thanks to this golden age of gear we live in there are more and more flangers coming out all the time; I’m only interested in the ones that sound good and/or have something unique to offer, and that’s why I want you to want the Shepard’s End.

The Shepard’s End is unique because it’s an infinite flanger, meaning it’s capable of producing what is called ‘barberpole flange’.  So what the hell is ‘barberpole flange’ you ask?  Well you see kids, in normal flanger pedals, the filter will oscillate, or move up and down, to create that nice pleasant whoosh that is so thrilling to at least my ears.  In contrast the Shepard’s End tricks are based on the Shepard tone or effect.  The Shepard effect creates the auditory illusion of a tone that continually ascends or descends in pitch, but does not seem to get any higher or lower (if you want to learn more about it click here).  Basically it means the flange wave has no beginning and no end (how zen), which means the filter can perpetually sweep up or down.  Like forever, or at least your brain is tricked into perceiving that it does (damn naive brains).  Hence the term ‘barberpole’ being applied here.  It can also do continual ‘through-zero flange’ and also features positive and negative regeneration, so your flange can sound more chorusy-phaser-like or like an imploding metal tubular black hole respectively.  This means that this is probably the weirdest flanger you’ll come across.  In the video it sounds very synthy and at times almost laser-like.

Tweakables:

Wave – adjusts the shape of the flange wave for upward, through-zero, or downward cycles.  Either way it’s gonna get goopy and it’s gonna go on forever, like a signal sent out into space in search of extraterrestrial life.
Speed – Adjusts the rate of the filter sweep.
Regen – Adjusts the regeneration, or the amount of signal fed back into itself anywhere from none to negative and positive.  Lots of tones reside here in this knob I’m sure.

You can find the Shepard’s End and the whole line of Mr. Black pedals at www.mrblackpedals.com

That’s all for now.  Thank you for reading!  As always feel free to leave me a comment about how your day is going.  Or something about pedals is cool too.

Love,

Nick
The Pedal File

Pedal Feature – Alexander Pedals Radical Delay Demo

Is it time for another post already?  I suppose it is considering you’re reading this and I’ve already written it.  Cause and effect, you know?

So anyway, I’ve got a Radical Delay in my possession to exhibit just for your eyes and ears; therefore I must share what I’ve learned studying this unique specimen up close in my laboratory.  Since I’ve talked about the Radical delay and it’s tweakables in a previous post, I’ll leave most of the details to the demo video and try not to repeat myself, myself, myself….sorry, I’ve gone and repeated myself.  Here’s what I found out:

Alexander PedalsThe Radical is a knob tweaker’s dream and will reward you a king’s ransom for experimenting with settings.  That’s why you’re here right?  To seek out the pedals that will give you unprecedented authority in the tonal realm like you’re a big bank and pedals are a world currency.  Well the Radical Delay is a currency you should be manipulating, you capitalist pig!

This pedal sure can do standard digital delay sounds (10-900ms) with all the dotted eighth note syncopation you could desire.  It’s fun to play licks and have them be augmented by the delay trails into something you did not expect.  From the moment I plugged into the pedal, I was sucked in and immediately inspired – It’s tones made me feel like I was drifting backwards and forwards in time at the same time, as if I was watching an old movie set in the future.  And this was before getting into the remarkable sounding chorus/vibrato modulation, bit crushed synthy sounds, octaves, detune, strange harmonizing fun house mirror Mario on acid circus pitch shifting arpeggios, AND pseudo flange/phase/rotary/organ tones that can be imparted on the wet signal (I think that about covers it!).  No, this delay does not self-oscillate, but more than makes up for it in droves with it’s little tricks and tweaks to delight your ears.  (Don’t worry, turning the time knob while passing a signal through the Radical will still create all those cool twisted warping sounds.)


The Radical also offers some sensational slapback/short delay tones, especially when you start experimenting with the other aforementioned sounds.  It can become much more than just a delay in this way, and is great for adding subtle (or not so subtle) textures/atmosphere to riffs; so much so that it might only be apparent when you turn the pedal off, but trust me, you will quickly turn it back on.

If you’re looking for a straight-ahead digital delay that can do the usual delay tricks, the Radical can handle most of that, but you’re going to miss out on a lot of tonal/textural fun.  As I tried to demonstrate in the video, the Radical runs the full spectrum of subtle to extreme sounds (some that aren’t even actually ‘delay’), and for that reason I think you’d dig this pedal for anything – from your 80’s cover band to your cutting edge post rock, djent polka, ambient disco, space jam, dub step, emo band. I enjoy playing with this pedal immensely, and appreciate it’s ability to make me get lost in it.

If you want to get lost in the black hole of your mind ala Matthew McConaughnamahay in Interstellar, the Radical is your starship (watch out for Matt Damon though).  In other words, buy it!

For more info check out www.alexanderpedals.com

That’s all for now.  Leave me a comment with your thoughts!

Love,

Nick
The Pedal File

The Pedal File – Some Great Pedals Made by the Little Guys

Hello there!  It’s The Pedal File back for more pedal-packed fun!  ‘Two posts in one month?’, you’re thinking.  I’ve got to try to keep up, you’re a feisty bunch, aren’t you?  The reason I write today is to tell you about some great pedals made by some of the little guys in the pedal biznass.  I want to remind you not to get swept up on the pedal bandwagon, and that there are some truly hidden gems among the ‘lower’ classes of pedal makers.  I’d like to prove that all pedal makers are equal until proven guilty by a court of unhappy customers on a pedal forum.  Or something.

VFE Pedals Tractor Beam

VFE stands for Von Rutter Family Effects, started by mathematician/physicist Peter Rutter as a hobby.  Not the catchiest of names, but he could have named his company Peepee Poopoo Pedals for all I care.  We’re here to talk about pedals and tone, not marketing.  The reason I include this company is because they specialize in giving you as many tones in one box as you can handle (seems like more of a disease than a hobby, but I can relate).   VFE offers pedals with so much tweakability and versatility, one pedal purchase from them is like buying at least 2 or 3 pedals from your favorite Run Of the Mill Co.
The Pedal File - VFE Tractor Beam
On top of that, you can design your own custom pedal with colors, art, knobs, etc. in their Pedal Wizard, and you can actually submit circuit design ideas to them that they might put into production.  One of the coolest things they do though is support any musical artist that uses their pedals.  Got a recording with a VFE pedal on it?  They’ll put it on the site.  The icing on the nipples by far though is when ordering a custom pedal, a percentage of the purchase goes toward an artist that you can choose from their artist program!  I can’t even decide how many extra points they get.  It’s a lot though.

The Tractor Beam is for those of you who want to dial in an absurd range of phaser sounds.  Multiple selectable stages, inverted phasing, the ability to mix phaser and vibe effects together, the option of momentary switching for quick on/off effects, you can even adjust the brightness of your LED for Oprah’s sake!  You know what I think?  I think Peter Rutter is an alien-human hybrid creature created by the U.S. government to distract us with his tantalizing pedals from what’s really going on.  I’m on to you, Mr. Rutter…

Tweakables: Quoted text from the manual.
Speed – “Sets the speed of the phaser. In version 2, we increased the max speed by 50% and doubled the rate of the slowest speed. In order to have a super-wide range that is still easy to dial in, we had pots custom-made specifically for the Tractor Beam.”  No expense spared there.
Center – “Sets the center of the phase sweep. Turn counterclockwise for low-end throb, turn clockwise for watery shimmer, and set at noon for a full-range sweep.”
Feedback – “Sets the feedback, which is perfect for those slow, resonant phase sweeps. Clockwise = negative feedback, counterclockwise = positive feedback, 12:00 = zero feedback.”
Mix – “Blends between the dry, unaffected signal and the wet, phase-modulated signal. Because phasers get their sound by the interaction of the dry signal, the 12:00 position will yield the strongest phasing. Turn counterclockwise for a resonant tone with less pitch modulation. Turn clockwise for pitch modulation with less phase resonance.”
Stages – “Selects the number of phase stages. More stages = wider phase sweep. The 3-stage position is inverted, for reverse phase sweeps.”  Not like where a play is performed, silly.  Stages as in the number of peaks/notches in the phasing signal to give you different phasey tones.
Mode – “Selects the voicing of the phaser. P = synced phase sweep, V = warbling vibe sweep, PV = half phase, half vibe voicing.”
Internal Controls – “The internal LEVEL trimpot sets the output volume. NOTE: The JFET is factory set for maximum phase sweep – DO NOT ADJUST.”
True Soft Bypass – “All VFE Pedals use true bypass relay switching combined with effect-side FET switching. This makes for pure and smooth switching that is rated for a longer lifetime than you.”  Well now I feel inferior, but hey that’d be a cool heirloom to pass down…
DualMode Switching – “DualMode is a unique VFE feature that lets you setup the footswitch for momentary operation (press & hold = on, release = off). To activate, wait 5 seconds and then press tap+tap+hold until LED flashes.”  Maybe you just want to be able to throw some quick phase on only part of a riff, or even toggle the effect on and off – now you can.
LED Brightness – “Just because we can, there’s an internal trimpot to set the LED brightness just the way you like it.”  Not that I ever thought I needed this on a pedal, but I admit there are a few on my board that light up like frickin’ laser beams.
Carling Footswitch – “The part that you step on shouldn’t be made cheap. We use rugged, industrial grade Carling footswitches in all our pedals.”  Agreed, I always feel a little sour when a pedal company uses cheap components.  Nothing better than a pedal that feels like a brick in your hand.

asduigh984qaubgaiuh49…Sorry, I drooled all over my keyboard and my fingers were slipping.

Check out www.vfepedals.com for more info, but heed my warning: there are lots of pedals and lots of info – you might spend a long time on there.  Also check out the video demos by various people who are not me, and please also note that the demo is for the original version that was called the Enterprise.


Alexander Pedals F.13 Flanger

I’ve talked about Alexander Pedals in a previous post, but I just discovered this soon-to-be-released, soon-to-be a wonder of the pedal world: the F.13 Flanger.  As I predicted, flangers are coming back y’all, and this is one you should take a hard look at.  When I saw that the makers of the Radical Delay have a flanger coming out, it was difficult to contain my excitement, so I went down to my pedal dungeon to blow off some steam.  I feel a little better now…

The Pedal File - Alexander Pedals F.13 FlangerAlexander are another company that doesn’t want to insult your intelligence with copies and clones of everything else.  Matthew Farrow is doing his own thing, which enables you to do your own thing in return.  It’s sort of beautiful really.  The F.13 takes the company a step further in that direction.  This flanger has features that I have yet to hear of in another flanger, like step flangering (think step filter) and dynamic flangering(ydingdong) (think envelope filter/auto wah effects in the way your attack/signal triggers the effect).  Alexander have already forged a path with their small line of effects in their short existence, and I have to say I’m really excited for them to release more.

Unfortunately there isn’t even a demo video to hear how it sounds (perhaps soon I can fill the void), but I’m confident it will sound awesome.  Read on for knobbage.

Tweakables:
Rate – “Controls the rate of the low-frequency oscillator (LFO) for the flanger, from glacial to space invaders.  Controls the input sensitivity in Dynamic mode.”
Depth –  “Controls the maximum LFO sweep.  In Step mode, the depth control chooses downward steps, upward + downward steps, upward steps, or random steps.  In Dynamic mode, this controls whether the flanger sweeps down (less than noon) or up (greater than noon) based on the input signal.”  I really want to hear this thing!
Mix – “Controls the blend between the dry and flanged signal.  Equal mix is at 12 o’clock.  Hint:  Pitch vibrato is available with low Regen settings and fully wet mix.”  Very cool, normally flangers don’t have a mix control, but they should because sometimes you want just a little.
Regen –  “Adjusts the amount of flanged signal fed back into the modulation.  Zero feedback is at noon, clockwise increases the positive feedback for a standard flanger sound.  Twist this knob counter-clockwise for negative feedback and a unique “inside out” flange.”  I’d sure like to turn this thing inside-out…

Mode Toggle:
Step -“The flanger LFO is forced to “step” to eight different values for transforming robot sounds.  Sweeps either up, up + down, down, or random.  The random mode is similar to a synthesizer “sample and hold” effect but with flange instead of filter.”  Umm, I am seriously interested.  Damn you, Alexander, and your temptations.
Sweep –  “Traditional flanging is found here.  The LFO for the F.13 is actually a “hypertriangular” waveform, so that the flanger spends more time in the interesting portions of the sweep.  Hint:  Set the Rate control at zero for “filter matrix” style manual flanging.  The Depth knob controls the flange position.”  I might need a new keyboard, more drool commencing.
Dynamic –  “This one is kind of unusual, even for us!  The flanger delay time is set by the volume of the input signal.  The Rate knob adjusts the sensitivity, to allow for different pickups or effects before the F.13.  The Depth knob controls which direction the flanger will sweep when it hears the input signal.  Don’t say we didn’t warn you.”   I won’t.

And to think flangers couldn’t get any cooler, the F.13 is in my opinion the most enticing to date.  I’m impressed by Matthew Farrow’s creativity when it comes to pedal design.  It’s apparent that this guy has some experience with what he’s doing, and that each new pedal he makes will most likely be a pleasant surprise for pedal enthusiasts, thus proving that the pursuit of rockin tones will continue on.  There’s a perk to giving this company your money too – they’ll put a portion of it toward cancer charity in honor of Mr. Farrow’s brother.  Hey and unlike the Red Cross, I bet they actually donate it too!

Alexander only has a small line of other effects so far, but you should check them out.  Now.  Go on, get! www.alexanderpedals.com

So that’s all for now, kiddies.  I hope this will hold you over until next time, but until then feel free to shoot me a comment and tell me what you think, or get at me through my Contact page if you’re a little Anonymous Andy.

Thanks for reading.

Love,

Nick
The Pedal File

The Pedal File: Catalinbread’s Montavillian Ambient Echo

Good day, pedal filers!  It’s official, your favorite source of wacky pedal news can now be found at ThePedalFile.com!  That’s right, I guess I’m here to stay for a little while.  That’s good news for you and bad news for all the pedals I’ve yet to encounter.  May this be their warning…  Anyway, I’d love to tell you what else is new around the luxurious offices at The Pedal File HQ (hint: it’s a pedal) – the Montavillian Ambient Echo by Catalinbread Mechanisms of Music of Portland, OR.  My dedicated staff slaves and I love the creamy space feelings this unit provides, like being engulfed in a UFO tractor beam (what you’ve never felt that?).

Catalinbread has a full line of effects worth looking into, but delay is where they stand up and out, fully erect.  I posted before about their Echorec pedal, which is an impressive recreation of the Binson Echorec, as well their Zero Point flanger and Anchtithon fuzz/tremolo/mushroom pedal.  They also offer the Belle Epoch, their take on remaking the sound of the Maestro Echoplex EP-3.  As you can see, Catalinbread love their classic delays as much as Americans love rehashed music and cinema.  It comes as no surprise then that Catalinbread would be able to engineer a useful delay pedal with features that straddle the line between old school and modern, analog and digital.  (I’m going to coin a new term here – Digilog….  Trademark.)

Your first time with the Montavillian you will become enchanted, paralyzed, unable to escape the comforting trails of delay even though you recognize your own mortality could be at risk because, you know, if you don’t take a break from playing with pedals and at least eat something you may not make it more than a few days.  I barely was able to break myself away and survive.  Always remember, just because your pedals are machines, that does not make you one (Do pedals dream of electric sheep?).

I’m not here to blow smoke or talk in hyperbole (mmmaybe a little, but mostly just in ridiculous and absurd metaphors).  I bought this pedal, and I really love it because of its unique, versatile, and superb aural qualities.   (As you may know, that’s pretty much my checklist for an effects pedal.)

The Montavillian Echo uses the PT2399 chip (used more commonly in lo-fi delays like the Recovery Effects Cutting Room Floor, Caroline Kilobyte, Wampler Tape Echo and many others), but in Catalinbread’s words, “…rather than slavishly following the datasheet, we threw it out and ventured out on our own, using our ears to guide us, and what we achieved is a fantastic sounding delay.”  Indeed they have.  All I can say is their ears must be like freaking sherpas if they led them to such a majestic mountain of delayness.  Maybe I just don’t know shit about designing pedals and pairing components, but I’m surprised that a chip with such a lo-fi reputation could produce a delay so beautiful, so warm, so inviting.

The true Jesus fart (that’s what I call miracles) behind the great tone of this pedal is that this delay does not use companding to process your signal.  Companding is a combination of the words compress(ing) and expand(ing).  Basically, this means that in most analog/BBD-emulating delay pedals, your input signal is compressed, processed, then expanded back to input strength to the output.  Instead of the delay trails getting dirtier as they go, the Montavillian maintains clarity on the delay trails creating an almost reverby, pad-like effect.  (This is my favorite delay to get a realistic spacey synth tone when paired with fuzz and/or octave pedals like the EQD Bit Commander or Iron Ether Subterranea.)  It doesn’t take an engineering degree to understand that the less your signal is processed, the better and more pure your tone should be.  No companding = no strangling then smoothing out of your signal.  Your signal slides in there unimpeded like Bill Cosby at cocktail hour.

Tweakables: Quoted text from the manual

REPEATS“feeds signal from the output of the delay line to the input. This control allows for a single repeat all the way to self oscillation.”  It doesn’t take a lot to make this thing freak out.  In a good way.  Like the equivalent of a bunch of hippies flailing around not being able to control the urge to let their hands chase each other at a Phish concert.  (Okay bad example because nobody likes watching hippies chase their hands at jam festivals…Okay well, I do, for a good laugh.)
MIX“this knob is traditional in the way it mixes into your dry path the amount of echo you want. What is not traditional is the amount of boost it permits you to add… So many echo pedals out there can barely tune the repeat to unity with the gain. This is not at all the case with the Montavillian Echo! You can make your repeats much louder than the dry signal. This comes in really handy for short repeats for a dramatic doubling effect as well as self oscillation freakouts.”  You can impress your friends with these slick delay tricks that can’t be pulled off with everyday delay pedals.  The result can be pretty strange since the repeats are louder than your pick attack; it almost sounds like reverse delay.  Seriously I don’t know of another delay that can do this, but please correct me if I’m wrong.  An extra point shall be awarded for this feature on the official Pedal File Pedestal.
TIME“this knob allows for a wide range of delay times, ranging from around 60ms all the way up to over 600ms max time.”  I prefer 1000ms of delay time, but I realized with this pedal that 600ms is plenty for most delay effects.  I have not really found it to be limiting.
CUT “this knob is a really neato control that I haven’t seen before on an echo. It’s function is to sweep from about 400Hz to about 1500Hz, lowpass filter… When the knee sweeps to the high side it gives a nice little bump in the mids right before the subtle fall off. Tuning this knob allows you to sweep from old school BBD dark filtering to a clear repeat. It gives you the power to adjust your echoes so that they sit in the mix perfectly against your dry signal. This control also functions to EQ the tonality of self-oscillations.”  All of the knobs on this pedal are quite sensitive with a large range of tweakability.  The cut knob is probably the most important as this is how you go from brighter repeats to dark and warm analog style wash.  Herein lies the secret to getting versatile delay tones out of just one pedal.  No matter where you set it, the repeats trail off getting darker as they go, like a low pass filter city going to sleep.  Don’t be fooled, even the brighter settings retain a certain warmness and wrap your ears in a big fur blanket that drags you down by the fire to make sweet love.

There is something soothing about the Montavillian’s tones, more so than any delay I’ve played, like listening to ocean waves, Air (the band), or the cries for help of innocent pedals.  If delay ain’t your thing, but you want an interesting ‘boost’, you can use it like an old school analog delay preamp that can add a perceived boost and a bit of pleasing harmonics to your signal.  It instantly adds more balls to dirt pedals and is perfect for getting all psychedelic up in there.  Whether you drop more acid than Wayne Coyne or you play for Jesus in your worship band, you will love this pedal (and Jesus will too).

The Montavillian is a pedal that you plug into and you can’t make it sound bad, unless you play blues rock.  Or hair metal.  Don’t do that out of the privacy of your own home.  Otherwise you’ll be fine.

Check out www.catalinbread.com for more info

That’s all for now.  Leave me a comment to let me know your thoughts, and thanks for reading!

Love,

Nick
The Pedal File